Standard ServicePopular

£30.00

excluding parts
(BS6102 Part1 1992)
Your bicycle will have a full Safety inspection to make sure it is safe for you to ride on the road. We will contact you immediately if any other defects are found - if repairs are required they will be charged separately depending on the work and parts required.
  • There must be no sharp edges or exposed screw heads
  • There must be one red rear reflector and two white reflectors
  • There must be two braking systems fitted. A locknut must secure the brake assembly to the frame, the brakes must not bind and only contact the braking surface. The failure of a brake cable must not inhibit rotation of the wheels
  • The bars must have a width between 350mm and 700mm and the ends must be fitted with plugs or handgrips
  • The maximum inflation pressure recommended by the manufacturer. There must be at least 2mm between the frame or fork and the tyre and more than 89mm between the pedal and the front tyre or mudguard
  • Steering must be free to turn through at least 60 degrees and the wheels must not be detached easily from the axle
  • Pedals must not touch the ground when the bike is 25 degrees from vertical

New Bicycle Assembly

From £30.00

excluding parts
(BS6102 Part1 1992)
If your bicycle is purchased new online or from a High street retailer they are sometimes delivered boxed. We offer a service to build your bicycle correctly to BS6102 Part1 1992 standard, so you can start to ride and enjoy your new bicycle.
  • Tighten all nuts and bolts to the correct torque to the manufacturers specifications
  • Set up brakes and gears
  • Inflate tyres to the correct pressure
  • Safety inspection to make sure we are happy with the bicycle

Intermediate Service

£60.00

Child's £30
excluding parts
the bicycle must be 24” or under to qualify for the child's charge (excluding folding bicycles)
  • The bike will get a full Safety inspection
  • All moving parts lubricated
  • All cables inspected for wear
  • Front & rear brakes adjusted and pads checked for wear
  • Drive train degreased and lubricated
  • All bearings checked for ware and adjusted (wheels, headset, bottom bracket)
  • Wheels checked for running true
  • Tyres checked for wear and pressure
  • All nuts and bolts to correct torque to the manufacturers specifications
  • Frame and forks visually checked
  • We will contact you immediately if any other defects are found - if repairs are required they will be charged separately depending on the work and parts required
  • A written report of work done and/or required
  • Usual turnaround 48 hours

Full ServicePopular

£115.00

excluding parts
This is comprises of a full strip down of your bicycle - all parts will be cleaned, inspected, greased or lubricated and then rebuilt.
  • All cables replaced
  • All loose bearings replaced (headset, front/rear hubs and bottom bracket)
  • Wheels tuned and spokes checked for correct tension
  • Sealed units inspected, greased and replaced
  • We will contact you immediately if any other defects are found - you will only be charged for parts required as the labour charge for fitting will be included in the service cost
  • A written report of work done and/or required
  • Usual turnaround 72 hours

Collection & Delivery

FREE

Collection and delivery is FREE within a 5 mile radius of Surbiton. There is a £5 charge for collections and deliveries over 5 mile radius

Labour

Labour £30.00 per hour, £10.00 per 20 mins